5 yuv / rg(s)b input module, 6 rgb analog input module, Yuv / rg(s)b input module – Barco R9851560 User Manual
Page 21: Rgb analog input module, Input modules
4. Input modules
4.5
YUV / RG(s)B input module
Technical info:
•
Component Video (BNC)
- R-Y : 0,7Vpp ±3dB 75 Ohm termination.
- Ys : 1Vpp ±3dB (0,7V Luma +0,3V Sync) 75 Ohm termination.
- B-Y : 0,7Vpp ±3dB 75 Ohm termination.
•
RG(s)B (BNC)
- R : 0,7Vpp ±3dB 75 Ohm termination.
- G(s) : 1Vpp ±3dB (0,7Vpp G + 0,3Vpp Sync) 75 Ohm termination.
- B : 0,7Vpp ±3dB 75 Ohm termination.
•
3 BNC’s loop through connectors.
•
Amber LED (upper LED on the front side) will be lit indicating recognition of film, either continuous or
intermittent film detection.
•
When placed in an input slot the green LED (lower LED on the front side) will be lit indicating that the
system acknowledges the module.
•
Supports MacroVision™.
D320 YUV/RGSB
IN
OUT
Image 4-9
Image 4-10
Order info:
Article No.
Description
R9850940
D320 Lite Digitizer YUV / RG(s)B input module
4.6
RGB analog input module
Technical info:
•
Sub D15 connector for input and loop through.
•
R, G, B, Hsync, Vsync : 0 to 1 Vpp ±3dB 75 Ohm termination.
•
Black level : 300mV.
•
Sync-tip : 0V
•
Resolution : SXGA and UXGA version available.
•
Amber LED (upper LED on the front side) will be lit indicating recognition of film, either continuous or
intermittent film detection.
•
When placed in an input slot the green LED (lower LED on the front side) will be lit indicating that the
system acknowledges the module.
R5976471 D320 LITE DIGITIZER 15/11/2006
17