Brinno TLC100 - Manual (Page 8)

Standard Installation
Manual Installation
Two installation options are provided.
The No Questions Asked Installation option is
the standard installation and asks no technical
questions. This is the recommended method of
installing the time, date and custom time interval
setting program.
The Do Not Install option allows you to exit
the setup program without installing “Brinno
TimeLapse Camera”.
1. There are 2 programs on the USB Flash Drives supplied with the TimeLapse Camera. The first program
“TimeLapse Camera Setup” allows you to set the time and date of the TimeLapse Camera to your local
time. This program also allows you to set the time interval for the Custom setting on the TimeLapse
Camera.
2. The second program called “TimeLapse Camera Player” allows you to play the videos taken by the
TimeLapse Camera. (You can download the latest program from www.brinno.com).
3. Before running the Brinno TimeLapse Camera programs, they must first be installed on your computer
using one of the methods described below.
1. Insert the USB Flash Drives included into your computer.
2. The USB Flash Drives will automatically open to the folder named “Brinno TimeLapse Camera”, where you
will see an icon named “Setup TimeLapse Camera”.
3. Double click on this icon to start the setup program.
If you insert your USB Flash Drives into your computer and it doesn’t automatically open up to show the
“Setup TimeLapse Camera” icon, use the following procedure to install the program manually.
1. Browse to the USB Flash Drives and find the “Setup TimeLapse Camera” icon.
2. Double click on this icon to start the setup program.
Installing software
Brinno TimeLapse Camera - 6