Calculated Industries 4215 - Manual (Page 27)

Paperless Tape Function
The Paperless Tape allows you to review
the last 20 entries of a calculation. To
access this function, press
[Rcl] [=].
To review entered values, press [Rcl] [=]
to access the tape mode and then press
the
[+] or [–] keys to either scroll forward
or backward through the entries.
While in the paperless tape mode, the dis-
play will show the entered or calculated
value, along with the sequence number of
entry (e.g., 01, 02, 03, etc.) and the math
operator (+, –, x, ÷, %) in the upper left
corner of the display.
If an equals ( [=] ) has been used in the
middle of a string and then added to, the
letters
SUB (Subtotal) will display in the
upper left. If equals ( [=] ) was the last oper-
ation performed, the display will show TTL
(Total) as the last entry.
To exit the paperless tape mode, press
any key besides
[Off], [+], [–]. Exiting the
tape will display the last entry (or TTL),
and allow you to either exit completely,
or continue using the last tape value for
another operation. For example, to store
the last value as “Length”, press any key
besides
[Off], [+] or [–] and then press [=]
[Length].
User’s Guide – 27