Calculated Industries 4225-C - Manual (Page 15)

P OCKET R EFERENCE G UIDE — 12
PRESS: SETTING--FUNCTION
Fourth press Headroom Height Setting:
of
T: --6
FEET
8
INCH
+* --6
FEET
9
INCH
–* --6
FEET
8
INCH
*Press + to increment or – to decrement by
one inch.
Fifth press Exponential Mode:
of T: --OFF
+ --On
+ --OFF (repeats options)
Sixth press Meter Linear Displays:
of T: --0.000
M
+ --FLOAt
M
(floating point)
+ --0.000
M
(repeats options)
Seventh press Decimal Degree Displays:
of
T: --0.00º
+ --FLOAt (floating point)
+ --0.00º (repeats options)
Eighth press Fractional Mode:
of
T: --Std.
+ --COnSt
+ --Std. (repeats options)
Note: Press o at anytime to exit the Preference
Settings.
(Cont’d)