Calculated Industries 4050-F - Manual (Page 7)

P
OCKET
R
EFERENCE
G
UIDE
— 3
i
Inch Key — Enters or con-
verts to Inches. Entry can
be whole or decimal num-
bers. Also used with the /
key for entering fractional
inch values (e.g., 9 i 1
/ 2
). Repeated presses
during conversions toggle
between Fractional and
Decimal Inches.
/
Fraction Bar Key — Used
to enter Fractions. Fractions
can be entered as proper
(1/2, 1/8, 1/16) or improper
(3/2, 9/8). If the denomina-
tor (bottom) is not entered,
the calculator's fractional
accuracy setting is auto-
matically used.
m
Meters Key — Enters or
converts to Meters.
c
Centimeters Key — Enters
or converts to Centimeters.
M
Millimeters Key — Enters
or converts to Millimeters.
b
Board Feet Key — Enters
or converts Cubic values to
Board Feet. One Board
Foot is equal to 144 Cubic
Inches.