Brother DCP-7045N - Manual (Page 25)

17
3
3
Paper settings
3
Paper type
3
Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Press Menu.
b
Press a or b to choose 1.General
Setup.
Press OK.
c
Press a or b to choose 1.Paper Type.
Press OK.
d
Press a or b to choose Thin, Plain,
Thick, Thicker, Transparency or
Recycled Paper.
Press OK.
e
Press Stop/Exit.
Paper size
3
You can use seven sizes of paper for printing
copies: A4, Letter, Executive, A5, A6, B5 and
B6.
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document on the page.
a
Press Menu.
b
Press a or b to choose 1.General
Setup.
Press OK.
c
Press a or b to choose 2.Paper Size.
Press OK.
d
Press a or b to choose A4, Letter,
Executive, A5, A6, B5 or B6.
Press OK.
e
Press Stop/Exit.
Note
If you chose Transparency as the paper
type you will only be able to choose
Letter or A4 size paper in Step d.
Volume settings
3
Beeper volume
3
When the beeper is on, the machine will beep
when you press a key or make a mistake. You
can choose a range of volume levels, from
High to Off.
a
Press Menu.
b
Press a or b to choose 1.General
Setup.
Press OK.
c
Press a or b to choose 3.Beeper.
Press OK.
d
Press a or b to choose Off, Low, Med or
High.
Press OK.
e
Press Stop/Exit.
General setup
3