Calculated Industries 4067 Pocket Reference Guide User Manual
Page 13
11
Ch
Hip/Valley (Advanced) – Calculates advanced lengths and
angles for Regular and Irregular Hip/Valley Rafters.
j
Jack Rafter (Basic) – Calculates basic lengths and angles for
Regular and Irregular Jack Rafters.
Cj
Jack Rafter (Advanced) – Calculates advanced lengths and
angles for Regular and Irregular Jack Rafters.
s
Stair (Basic) – Calculates values for Stairs when Floor-to-Floor
Rise and/or Stair Run is entered.
Cs
Stair (Advanced) – Calculates values for Stairs, allowing for
Upper and Lower Flooring Thickness, Nosing Length and Riser
Thickness for additional calculations.
c
Circular – Calculates for Diameter, Radius, Perimeter or Area
when one of these values is entered. Enter Height and one of the
other four values to calculate Cones and Columns.