Calculated Industries 4315 - Manual (Page 27)

Paperless Tape Function
The Paperless Tape allows you to re v i e w
the last 20 entries of a calculation. To
access this function pre s s
[Rcl] [=].
To review entered values, press
[Rcl] [=]
to access the tape mode and then pre s s
the
[+] or [ – ] keys to scroll forward or
backward through the entries.
While in the paperless tape mode, the
display will show the entered or calcu-
lated value, along with the sequence
number of entry (e.g., 01, 02, 03, etc.)
and the math operator (+, –, x, ÷, %) in
the upper left corner of the display.
If an equals (
[ = ]) has been used in the
middle of a string and then added to, the
letters
S U B (Subtotal) will display in the
upper left. If equals (
[ = ]) was the last
operation perf o rmed, the display will
show
T T L ( Total) as the last entry.
To exit the paperless tape mode, pre s s
any key besides
[ O ff ], [ + ], or [ – ]. Exiting
the tape will display the last entry (or
T T L), and allow you to either exit com-
pletely, or continue using the last tape
value for another operation. For exam-
ple, to store the last value as “ L e n g t h ” ,
p ress any key besides
[ O ff ], [ + ] or [–] a n d
then press
[=] [Length].
User’s Guide – 27