Calculated Industries 4325 - Manual (Page 7)

P
OCKET
R
EFERENCE
G
UIDE
— 3
Ç 7 Centimeters (cm) — Enters
or converts to
Centimeters.
Ç 9 Millimeters (mm) — Enters
or converts to Millimeters.
Ç 2 Acres (Acre) — Enters or
converts to Acres.
Length, Width and Height Keys
l Enters Length for calculation
of Area or Volume.
W Enters Width and calculates
Area, Square-up and
perimeter.
h Enters Height and calculates
Volume, wall Area and total
room Area. Calculates Height
(Depth) based on entered
Width and Slope or Percent
Grade. This is a permanent
entry; stored value holds
when turned off.
Construction Project Keys
Í Slope — Enters or calcu-
lates a slope ratio or slope
angle. Calculates based on
entered Width and Height
(Depth).
З Н Percent Grade (%Grade) —
Used to enter or solve Percent
Grade. Calculates Percent
Grade based on entered
Width and Height (Depth) or
Slope.