Calculated Industries 4018 - Manual (Page 7)

P
OCKET
R
EFERENCE
G
UIDE
— 3
(1/2, 1/8, 1/16) or improper
(3/2, 9/8). If the denomina-
tor (bottom) is not entered,
the calculator's fractional
accuracy setting is automat-
ically used.
m Meters Key — Enters or
converts to
Meters.
c Centimeters Key — Enters
or converts to
Centimeters.
M Millimeters Key — Enters
or converts to
Millimeters.
Ç 2 Acres — Enters or converts
(a square value) to
Acres.
b Board Feet Key — Enters
or converts Cubic values to
Board Feet. One Board Foot
is equal to 144 Cubic Inches.
Ç 1 Kilograms — Enters or
converts to Kilograms.
Ç 3 Metric Tons — Enters or
converts to Metric Tons.
Ç 4 Pounds — Enters or con-
verts to Pounds.
Ç 6 Tons — Enters or converts
to Tons.