Calculated Industries 8020 User Manual
Page 15
P
OCKET
R
EFERENCE
G
UIDE
— 14
FRACTIONAL SETTINGS
When your calculator is in a default condi-
tion (battery change or full reset), it is set
to round fractional values to the nearest
1/64th of an inch. However, you may pro-
gram your preference for six different
accuracy levels and two different modes
(Normal and Fixed), all of which remain in
permanent memory until revised or reset.
The fractional level can be revised by
using
Ç
as shown below:
Ç 1
= Fraction Set to 1/16”
Ç 2
= Fraction Set to 1/2”
Ç 3
= Fraction Set to 1/32”
Ç 4
= Fraction Set to 1/4”
Ç 6
= Fraction Set to 1/64”
Ç 8
= Fraction Set to 1/8”
If there is a value on the display, when one
of the functions above is performed the
accuracy level will be temporarily revised.
If the display is cleared, then the accuracy
will be permanently revised.