Calculated Industries 3302 - Manual (Page 20)

 ³ '
,0(16,21
0
$67(5
3
/86 Š
Entering Dimensioned Values
When entering dimensioned values, enter the larg-
est dimension first; feet before inches, inches before
fractions. Enter fractions by first entering the nu-
merator (value above the line), then press the [/]
key, then the denominator (value below the line).
Note: The first valued dimension entered in a
problem determines the format of the result.
For example:
63 yards + 59 inches = 64.63889 yards
63 meters + 59 inches = 64.499 meters
Dimension Examples
Enter the following dimensions (clear after each
entry):
DIMENSION KEYSTROKE DISPLAY
2 feet 2 [Feet] 2
FEET
½ inch 1 [/] 2 0 ½
INCH
2 feet 1 inch 2 [Feet] 1 [Inch] 2- 1
FEET INCH
11 yards 11 [Yards] 11
YDS
15 meters 15 [Meter] 15 METERS
Note: Yards and meters may only be entered
as whole (5 yards) or decimal (5.5 meters)
values, not in combination with feet-inch-
fractions (5 feet 10-7/16 inches).