Calculated Industries 3401 - Manual (Page 7)

U
SER
’
S
G
UIDE
- 5
Memory
µ - Store value in semi-permanent Memory
(e.g., 1 5 0 µ ).
s µ - Recall Memory value
(e.g., if
1 5 0
has been stored in
Memory, pressing
s µ
will display
150.00).
s µ µ - Clears Memory value.
Note: Semi-permanent means the value is not cleared
by pressing
o twice. Value is cleared when the cal-
culator is turned off or when s µ µ is pressed.
Decimal Place Selection
Press s and the number of decimal
places desired, up to six (e.g., s 1 ,
s 2 , etc.).
Pressing s 7 will set the calculator to
floating decimal point mode.
Note: When you turn the calculator off, the number of
decimal places is restored to two places.
Clear All
To clear/reset calculator to its default values,
press
s
then
x
(Clear All).
CAUTION: Use this only when you wish to
return the calculator to its default values.