Calculated Industries 9526 - Manual (Page 16)

How to Use the Preference Function:
Keystrokes Display
1. Enter preference mode:
[On/C] 0.
[Prefs] RND Punch
2. Scroll to type of preference you wish to
change by pressing [Prefs]:
[Prefs]
FMT 0. HR
[Prefs] TMR 0:00:00.0
3. Toggle preference by pressing [+] or
[–] keys:
[+] TMR 0:00:00.00
[+] TMR 0:00:00
[+] TMR 0:00:00.0
[–] TMR 0:00:00
4. Press any other key to exit the prefer-
ence mode. Preference settings will not
change until revised or until the
calculator is reset by pressing [Conv]
[x]
, which resets the settings back to
factory defaults.
In addition, preference settings will
reset to factory defaults when the Reset
button is pressed or the batteries are
changed.
16 – TimeCard Tabulator ™ II
UG9526E-C 4/4/03 12:54 PM Page 16