Calculated Industries 8703 - Manual (Page 64)

62 — H
OT
R
OD
C
ALC
™
APPENDIX E –
Accuracy/Errors, Auto Shut-Off, Batteries, Reset
ACCURACY/ERRORS
Accuracy/Display Capacity — Your calculator has an eight-
digit display made up of eight digits.
Errors — When an incorrect entry is made, or the answer
is beyond the range of the calculator, it will display the word
“
ERROR.” To clear an error condition you must hit the 
button once. At this point you must determine what caused the
error and re-key the problem.
ERROR CODES
DISPLAY ERROR TYPE
OFLO Overflow (too large)
MATH Error
Divide by 0
DIM Error Dimension
error
ENT Error
Invalid entry error
Auto-Range — If an “overflow” is created because of an
input and calculation with small units that are out of the
standard seven-digit range of the display, the answer will be
automatically expressed in the next larger units (instead of
showing “
ERROR”) — e.g., 20,000,000 mm is shown as 20,000
m. Also applies to inches and feet.
AUTO SHUT-OFF
Your calculator is designed to shut itself off after about 8-12
minutes of non-use.
BATTERIES
The Hot Rod Calc uses two LR-44 batteries.