ClearCube PCoIP System User's Guide - Manual (Page 78)

6.6 Connecting to a Device
ClearCube Technology, Inc. 71
Figure 33. Session Control page showing current peer IP
6.6
Connecting to a Device
The following sections describe how to deploy and connect zero clients and hosts for each of the
methodologies shown in
Table 3 on page 19 (and repeated in each of the following sections). The
concepts and terms discussed below (such as managed environment, CMS, reserved DHCP, and
so on) are discussed in
2.1 “ Device Management and Peer Assignment Options
” on page
12 and
2.2 “ Peer Assignment
” on page
13 .
Steps are provided below.
6.6.1 Unmanaged Static IPs with a Static Assignment
In the following table, the PCoIP configuration described in this section is circled in red.
Current
Peer IP Address