ClearCube R-Series Data Center Products - Manual (Page 119)

R-Series Data Center Products User’s Guide Hardware Upgrade and Replacement Procedures • 95
.
4. Remove the 4 screws from the bracket and remove the bracket from the fan.
5. Now attach the bracket to the new fan. Ensure that the:
• Power cable exits the bottom of the fan
• Bracket is oriented so that flange holes are on the bottom
• Bracket is attached to the side of the fan housing where the rotating fan blades
are located
Heatsink
Flange Holes
on Bottom
Power Cable
Exits Bottom
Airflow toward
Heatsink and
Rear of Blade
Bracket Attached to Side
Closest to Rotating Blades