Diode LED Infrared On/Off Switch - Manual

IG051514-1.0
1.877.817.6028
www.DiodeLED.com
INSTALLATION GUIDE
®
[email protected] www.DiodeLED.com 1 OF 1
INFRARED ON/OFF SWITCH
3
DO NOT CONNECT DIRECTLY TO HIGH VOLTAGE POWER!
Read all warnings and installation instructions thoroughly.
WARNING
Quick Specs
Installation
Wiring Connections
Input/Output Voltage 12V-24VDC
Max Load 36W/72W (12V/24V)
Ambient Temperature -4° ~ 122°F (-20° ~ 50°C)
Environment Suitable for dry / indoor locations
Sensor Range 5 in.
+
-
Prior to connecting to power, mount
Infrared ON/OFF Switch to surface using
3M™ Velcro Adhesive Tape. Ensure to
leave a 5 in. maximum clearance for
sensor to trigger.
Attach lighting load and Plug-In Adapter.
Plug adapter into electrical receptacle.
1
Input From 12-24VDC
Plug-In Adapter
Output To LED Load
Infrared Sensor
(Sensor Range: 5 in.)
2
FIXTURE ‘OFF’
FIXTURE ‘ON’
When infrared
sensor is obstructed
less than 5 inches
the LED fixture will
remain OFF.
When infrared sensor
is unobstructed further
than 5 inches the LED
fixture will turn ON.
# DI-1710