Document Outline

• Important Safety Notice
• Using This Manual
  • Key
  • Important
  • Before Flight
  • Watch the Tutorial Videos
  • Download DJI VISION App
• Overview
  • 1 In the Box
  • 2 Introduction
• Assembly and Use
  • 1 Removing Gimbal Clamp
  • 2 Preparing the Battery
    • 2.1 DJI Smart Flight Battery
    • 2.2 Usages
    • 2.3 Charging the Flight Battery
    • 2.4 Battery Installation
    • 2.5 Correct Battery Usage Notes
  • 3 Preparing the Phantom 2 Vision+
    • 3.1 Introduction
    • 3.2 Built-in Flight Control System
      • FC Assistant Port
    • 3.3 LED Flight Indicator Descriptions
    • 3.4 3-axial Stabilized Gimbal
      • Anti-drop Kit
      • Micro-SD Slot
      • Gimbal Error Warnings
    • 3.5 Camera
      • Lens cap removal
      • Camera Function Buttons
      • Camera Data Port
      • Camera LED Indicator
  • 4 Attaching the Propellers
    • 4.1 Introduction
    • 4.2 Assembly
    • 4.3 Removing the Propellers
    • 4.4 Notes
  • 5 Preparing the Remote Control
    • 5.1 The Remote Control
    • 5.2 Power on the Remote Control
    • 5.3 Remote Control Power LED Status Information
    • 5.4 Battery Level Indicator
    • 5.5 Antenna Orientation
    • 5.6 Remote Control Operation
    • 5.7 Linking the Remote Control and Receiver
      • Linking Procedures
      • Link Indicator
    • 5.8 Compliance Version Configuration
  • 6 Preparing the Range Extender
    • 6.1 Introduction
      • SYSTEM Indicator
      • POWER Indicator
      • Binding Reset Button
    • 6.2 Using Range Extender
      • Charging the Range Extender
      • Powering on the Range Extender
      • Checking the Battery Level
    • 6.3 Rename Range Extender SSID
    • 6.4 Binding the Phantom 2 Vision+ and Range Extender
  • 7 Downloading and Installing the DJI VISION App
    • 7.1 Download and Install
    • 7.2 Register and Login
      • [1] Register
      • [2] Login
      • [3] Usage tips
  • 8 Connecting the Camera
    • 8.1 Connecting Procedures
      • Wi-Fi Computer Connection Status Description
• Flight
  • Flight Environment Requirements
    • Preflight Checklist
  • 1 Calibrating the Compass
    • 1.1Calibration Procedures
    • 1.2 When to Recalibrate
  • 2 Starting/Stopping the Motors
    • 2.1 Starting Motors
    • 2.2 Stopping Motors
  • 3 Flight Test
    • 3.1Take off/Landing Procedures
    • 3.2 Video Suggestions and Tips
  • 4 Failsafe Function
    • 4.1 When Will Failsafe Activate?
    • 4.2 Failsafe Procedure
      • Failsafe on the DJI VISION App
    • 4.3 Regaining Control During Failsafe Procedures
  • 5 Low Battery Level Warning Function
    • Low Battery Level Warning on the DJI VISION App
  • 6 Flight Limits
    • 6.1 Max Height & Radius Limits
    • 6.2 Flight Restriction of Restricted Areas
    • 6.3 Conditions of Flight Limits
    • 6.4 Disclaimer
• DJI VISION App Usage
  • 1 DJI VISION App Main Menu
  • 2 Camera Page
    • [1] Return
    • [2] Camera Pitch Control
      • Normal Mode
      • Accelerometer Sensor Mode
    • [3] Flight Attitude and Radar Function
    • [4] Flight Parameters
    • [5] Wi-Fi Signal Intensity
    • [6] Flight Battery Level
    • [7] Aircraft GPS Status
    • [8] Micro-SD Card Status
    • [9] Range Extender Battery Level
    • [10] Remaining Shots
    • [11] Shutter Button
    • [12] Video Recording Button
    • [13] Camera Settings
    • [14] Hide or Show Flight Parameters
  • 3 Camera Settings
    • [1] Capture Mode
    • [2] Photo Size
    • [3] Video Resolution
    • [4] Photo Format
    • [5] Selectable ISO  [6] White Balance
    • [7] Exposure Metering
    • [8] Exposure Compensation
    • [9] Sharpness [10] Anti-flicker
    • [11] Restore Defaults
    • [12] Format Micro-SD Card
  • 4 Album Page
    • 4.1 SD Card Album
    • 4.2 Mobile Device Photo Album
  • 5 News Page
  • 6 Settings Page
  • 7 Ground Station
    • 7.1 Ground Station GUI
    • 7.2 Using Ground Station
• PC / MAC Assistant
  • 1 Installing Driver and Phantom 2 Vision+ Assistant
    • 1.1 Installing and Running on Windows
    • 1.2 Installing and Running on Mac OS X
  • 2 Using Assistant
    • 2.1 Using the Phantom 2 Vision+ Assistant
    • 2.2 Firmware Upgrade of the Phantom 2 Vision+
    • 2.3 Using the Phantom RC Assistant
• Appendix
  • 1 Rear LED Flight Indicator Status
  • 2 Specifications
  • 3 Troubleshooting (FAQ)