DJI S1000 Plus - Manual (Page 13)

Spreading Wings S1000+ User Manual
© 2014 DJI. All Rights Reserved.
13
7. Check that each Anti-drop Kit has been firmly installed in the reserved positions.
8. Note that the dampers are 45° silicon rubber. If you use other dampers or vibration absorbing balls, the
quality of your aerial photography may be affected.
Mount the GPS with a bracket to avoid interference from the center frame power board.
Use glue to install the GPS bracket. Ensure it is firm and stable before every flight.
Once the Anti-drop Kit is installed and the pin is inserted into the washer, the Anti-drop Kit cannot be
disconnected and reused.
Always test motors using the Assistant after installation. Refer to your flight control system user
manual for details.
Mounting Electronics and Wiring
dampers