DJI S800 - Manual (Page 12)

©2012 DJI Innovations. All Rights Reserved.
12
Step3: Mount H frame and T frame.
(1) Insert T frame through aluminum ring until it plugs into H frame.
(2) Fix T frame notch into H frame bulges outwards, make sure T frame will not move.
(3) Put the bi-pod on the flat floor to adjust H frame and T frame.
(4) Tighten all hexagonal socket head cap screws (including
①
and
②
).
Notices:
 Put bi-pod on the flat floor to finish mounting smoothly and correctly.
 Please mount the screws and use adequate screw glue.
 Separate the bi-pod by disconnecting the H frame to make for easy carriage.
Completed
Quick Disassembly