Settings – DJI Ronin User Manual

Page 25

Advertising
background image

©

2014 DJI. All Rights Reserved.

25

Ronin

User Manual

Settings

Adjust the following basic functions before using the Ronin: Auto Tune Stability, Briefcase Mode,

SmoothTrack and Maximum Speed Adjustment.

The definition and function of every button in the DJI Assistant App and DJI PC Assistant are the same, 

refer to the DJI Assistant App for more details.

Basic

1. Gimbal

Motor: The Auto Tune Stability button allows for automatic adjustment of each motor’s stiffness settings

(as relayed from the sensors and how the Ronin sees each axis’s interaction) to accomplish an

optimized setting. Each axis has its own stiffness and trim adjustment.

Live Data: This monitors the feedback from the motors on each axis.

Briefcase Mode: Select the checkbox to enable Briefcase Mode.

Motor Kill Switch: Select the checkbox to enable the Motor Kill Switch.

SmoothTrack: Select the checkbox to enable SmoothTrack. Note the Pan Axis and the Tilt Axis can be

independently adjusted.

The Pan and Tilt SmoothTrack speed can be tested. Ensure there is no obstruction of the camera

when clicking the Test buttons.

Reset Password: If you forgot your Bluetooth connection password, click here to reset your password.

Calibrate Center: If the Ronin’s Pan axis is off center, you can recalibrate the true center of the Ronin using

this switch. Using a remote control, position the pan axis at dead center, then click the Calibrate Center. Click

“Center” again in the pop-up to confirm. Once calibrated, power cycle for the new center to take effect.

Viewer Menu: The Viewer provides essential live data for monitoring the Ronin’s electronics and feedback

from the motors. Power is indicated for each axis. The current angle of each axis is also indicated.
Calibrate System: Calibrate System is only used if you notice any kind of drift in any of the axes. To

calibrate the system, place the Ronin on the tuning stand and make sure it is completely steady. Then

click the Calibrate System button and let the process finish before picking up the Ronin.

DJI PC / MAC Assistant Tuning

Advertising