Vizio E400i-B2 - User Manual User Manual

Page 11

Advertising
background image

1

5

E400i-B2

To install the stand:

1. Align the base with the neck piece and tighten three (3)

of the included Phillips screws with a Phillips screwdriver as

shown.

2. Align the stand with the TV and slide it into place as shown.

3. Tighten the remaining four (4) Phillips screws into the back

of the TV as shown.

4. When you are finished, place the TV on a stable, level

surface.

E320i-B2

To install the stand:

1. Align the stand with the bottom of the TV and slide it into

place as shown.

2. Using a Phillips screwdriver, tighten the pre-installed screw in

the center of the base to secure the stand to the TV.

3. When you are finished, place the TV on a stable, level

surface.

Advertising