Adjusting the audio settings – Vizio D390-B0 - User Manual User Manual
Page 33
5
27
ADJUSTING THE AUDIO SETTINGS
To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The AUDIO menu is
displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
• TV Speakers - Turns the
built-in speakers on or off.
• Surround Sound -
Surround sound uses DTS
TruSurround
™
to deliver
an immersive surround
sound experience from
the TV’s internal speakers.
TruSurround completes the
entertainment experience
by providing deep, rich
bass and by delivering crisp
details and clear, intelligible
dialog. Select On or Off.
• Balance - Adjusts the loudness of the audio output from
the left and right speakers.
• Lip Sync - Adjusts the synchronization between the
display image and the accompanying audio track.
• Digital Audio Out - Changes the type of processing for
the Optical and HDMI ARC output when connected to a
home theater audio system. Select PCM or Bitstream.
• Analog Audio Out - Sets the volume control properties
for the analog RCA (red/white) connectors when
connected to a home theater audio system. Select
Variable to control the external speakers’ volume from
the TV’s volume controls, or select Fixed to control the
external speakers’ volume from your home theater system
controls.
• Equalizer Settings - Adjusts the boost or attenuation of
different frequencies. When Surround Sound is On, you
cannot adjust the Equalizer Settings. Change the audio
mode by selecting Flat, Dynamic, Center, Bass Boost, or
Bright. To change the equalizer settings yourself:
Highlight EQ Mode and then press the Left/Right
Arrow buttons to select Basic. Adjust the Bass and
Treble settings.
—or—
Highlight EQ Mode and then press the Left/Right
Arrow buttons to select Advanced. Adjust each
frequency.
• Delete Audio Mode - Restores the audio settings to the
factory defaults. See
Resetting the Audio Settings on
4. When you have finished adjusting the audio settings, press
the EXIT button on the remote.
Help
VIZIO
Network
Sleep
Timer
Input
CC
ABC
Audio
Wide
Normal
Picture
Settings
Panoramic
Wide
Zoom
2D
3D
Exit
AUDIO
TV Speakers
On
Surround Sound
On
Balance
0
Lip Sync
0
Digital Audio Out
PCM
Analog Audio Out
Fixed
Equalizer Settings
Delete Audio Mode
-
+
-
+