Vizio P602ui-B3 - User Manual - Manual (Page 8)

1
INSTALLING THE TV
After removing the TV from the box and inspecting the package
contents you can begin installing the TV. Your TV can be installed
in two ways:
• On a flat surface, using the included stand
• On a wall, using a VESA-standard wall mount (not
included)
Installing the TV Stand
Your TV includes a stand designed to support the weight of the
TV and keep it from falling over. However, the TV can still fall over if:
• It is placed on an uneven, unstable, or non-level surface
• It is pushed, pulled, or otherwise improperly moved
• If an earthquake occurs and the TV is not properly
secured
Place the TV screen-down on a clean, flat surface. To prevent
scratches or damage to the screen, place the TV on a soft
surface, such as carpet, rug, or blanket.
To install the base:
1. Align the neck piece with the bottom of the TV and slide it
into place.
Insert and tighten four (4) M5 20mm Phillips screws into the
back of the TV as shown.
2. Align the base with the neck.
Insert and tighten four (4) M5 23mm Phillips screws into the
bottom of the base as shown.
3. When you are finished, place the TV on a stable,
level surface.
It is recommended that two people take part in the
base installation.
8