Vizio S4251w-B4 - Quickstart Guide User Manual

Page 15

Advertising
background image

15

LED Indicators are located here:

ADJUSTING SOUND BAR SETTINGS

Press the Menu button and use the Up/Down Arrow buttons on the remote to access the different functions and acoustic settings

of the Sound Bar. Each function and setting will be displayed on the remote control’s LCD display. The LED Indicators will behave

differently with each function.

Function

LED Behavior

Description

Bluetooth Pairing

(When searching for device)

Flash from Left to Right

and back continuously.

Press the Enter button on the remote. The Sound Bar will be discoverable for

15 minutes. You can now search for the Sound Bar (VIZIO S4251w) using your

Bluetooth Device. The sound bar will power down if no device is found.

Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.

Bass Levels

Two center LEDs

indicate Bass level 0.

Press the Next/Previous button to increase/decrease the bass level. The LED

indicators will move to the right with increasing levels and to the left with

decreasing levels.

Treble Levels

Two center LEDs

indicate Treble level 0.

Press the Next/Previous button to increase/decrease the treble level. The

LED indicators will move to the right with increasing levels and to the left with

decreasing levels.

Center Levels

Two center LEDs

indicate sound is

centered.

Press the Next/Previous button to increase/decrease the presence of the center

channel. The LED indicators will move to the right when the center presence is

increased and to the left when the center presence is decreased.

Surround Levels

Two center LEDs

indicate surround is

centered.

Press the Next/Previous button to increase/decrease the surround sound level.

The LED indicators will move to the right with increasing levels and to the left with

decreasing levels.

Surround Balance

Two center LEDs

indicate surround

balance is centered.

Press the Next/Previous button to move the Surround Balance level towards the

left/right rear channel speaker. The LED indicators will move to the right when

levels are adjusted to the right and to the left when adjusted to the left.

BT Pair

Bass

Treble

Center

Surround

Surr Bal

Advertising