Vizio XWR100 - User Manual - Manual (Page 4)

Setup Steps
1. Unplug the power cable from your high-speed Internet modem.
2. Connect one end of the Ethernet cable (included) to the number 1 port
on your router (Figure 1).
3. Connect the other end to the Ethernet port on your computer (Figure 2).
4. Connect an Ethernet cable from your high-speed Internet modem into
the Internet port on your router (Figure 3).
5. Plug the power back into your high-speed Internet modem. Wait 30
seconds and power on your router with the included power adapter. Your
router will automatically turn on.
6. Wait 30 seconds for your router to fully connect and open an Internet
browser window (such as Internet Explorer, Firefox, or Safari). Type
http://vizio.home (or 192.168.1.1) in the browser window and press
Enter (Figure 4). The Quick Setup App will automatically start.
7. Click ACCEPT and CONTINUE.
8. From here you can:
a. Click Print to print your configuration.
b. Click EDIT SETTINGS to make changes to the Network Name,
Security Type, Security Key, and Network Status.
c. Click Manual Settings to make changes to the advanced
settings of your router.
d. Click EXIT to close the Router Settings App.
If you have not successfully connected you will see this screen. Follow the
steps on-screen to resolve the issue or click the link at the bottom of the
screen to enter your user name and password if you have a DSL modem
using PPPoE.