Blaupunkt HEIDELBERG CD51 - Manual (Page 17)

17
FRANÇAIS
ENGLISH
ESP
AÑOL
PORTUGUÊS
➮
press the / DIS
7
button once
or several times for more than two
seconds until the desired elements
appear on the display.
Repeating individual tracks or
whole CDs (REPEAT)
➮
To repeat the current track, press
the button 4 RPT
>
briefly.
“REPEAT TRCK” appears briefly on the
display and RPT lights up.
➮
To repeat play of the entire CD,
press the button 4 RPT
>
once
again.
“REPEAT DISC” appears briefly on the
display and RPT lights up.
Stopping REPEAT
➮
To stop the repeat function for the
current track or CD, press the but-
ton 4 RPT
>
repeatedly until
“REPEAT OFF” appears briefly on
the display and RPT goes out.
Random play (MIX)
➮
To play the tracks on the current
CD in random order, press the but-
ton 5 MIX
>
.
“MIX CD” appears briefly on the display
and MIX lights up.
➮
To play the tracks of all the inserted
CDs in random order, press the
button 5 MIX
>
once again.
“MIX ALL” appears briefly on the display
and MIX lights up.
Note:
In the case of CD changers CDC A 08
and IDC A 09, all CDs in the changer
are randomly selected. All other chang-
ers first play all the tracks on a CD in
random selection before moving to the
next CD in the changer.
Stopping MIX
➮
press the button 5 MIX
>
until
“MIX OFF” appears briefly on the
display and MIX goes out.
Scanning all tracks on all CDs
(SCAN)
➮
To listen in briefly to all the tracks
on all inserted CDs in ascending
order, hold down the OK button
;
for more than two seconds.
“SCAN” appears on the display.
Stopping SCAN
➮
To stop scanning, press the OK
button
;
briefly.
The track currently being scanned then
continues play.
Note:
You can set the scanning time as re-
quired. Please see the section “Setting
the scanning time” in the “Radio mode”
chapter.
CD CHANGER MODE