Metrohm MagIC Net 2.0 - Manual (Page 4)

4 8.102.8005EN
This message points out which ports MagIC Net uses. Write down these
ports and inform your system administrator in case MagIC Net is not able
to connect to the database. Confirm the message with [OK].
7 As soon as the copying procedure has been terminated you can set further
workplace settings:
The option "The client ID must exist in the current MagIC Net sys-
tem" is only selectable, if a database from a previous installation exists on
your computer or if you want to connect to a database server which has
already been installed on another computer.
If you activate this option MagIC Net checks whether the identifier you
have entered exists in the database. If this is true the identifier and all asso-
ciated settings will be adopted. With this option a renewed installation of
a client is much easier.
Click on [Next]. If the database ports are not available, an appropriate error
message will appear and the installation will be canceled. In this case, check
your server and firewall settings before installing the program again.
8 At the end of the installation the file info.txt will be created which contains
all relevant information concerning your current MagIC Net installation.
Save this file on your hard disk in case of need in future and print it (add to
IQ). Complete the installation with [Finish].
An InstallLog file with a list of all files having been copied to your computer
and with a confirmation for a successful installation is saved in the
MagIC Net installation folder (default: C:\Program Files\Metrohm
\MagIC Net) under bin\InstallLog.