Bowens BWL-0328/2 - Manual (Page 3)

www.bowens.co.uk
Introduction
Safety Notes
3
DO NOT:
• Use in an environment where moisture or flammable vapour is likely to come in contact with the
unit.
• Restrict air vents while in use.
• Use a unit with damaged housing, mouldings, flash tube or modelling lamp.
If the unit is dropped or damaged in any way, always have it checked out before using.
• Operate the unit without a safe grounded (earthed) AC supply.
DO:
• Read Instructions before use
• Switch power off and disconnect from the supply before changing modelling bulb or flash tube.
• Disconnect the supply before changing the fuse. Never replace with a fuse of a different rating.
• Exercise care when handling equipment that has been in use. The reflector and front end of the
unit can become very hot.
• Avoid placing cables where they can be tripped over. Protect from heavy, sharp or hot objects,
which may cause damage and replace damaged cables immediately.
• Due to the high voltage / high energy used in all Bowens units, all servicing must be carried out
by an authorised Service Centre.
• Ensure that any extension cord used has a suitable current rating to prevent overheating and
never use coiled extension cords.
• ALWAYS remove the flash head covers before using.
Dear Valued Customer,
Thank you for choosing the Bowens Quad head professional flash system.
Accurate, ergonomic, powerful and simple to use, the Quad heads have been designed by working
closely with photographers to develop a flash that meets the standards demanded in professional
studios today. All ʻS-Typeʼ accessories from the Bowens range can be used with the Quad heads. For
details of all related products, please contact your local distributor, a list of which can be found at
www.bowens.co.uk . In order to obtain the full benefit from your purchase, please take a few moments
to familiarise yourself with this user manual.
Thank you.
Bowens International Ltd.
www.bowens.co.uk 6
Accessories
High-Performance Reflector
This 32cm reflector achieves the
maximum amount of light output
possible for lighting large groups
and bouncing light off of high
ceilings. The efficient parabolic
design delivers a narrow, bright
beam of light with intense shadows
and high contrast. A must where
sheer power is required. BW1878
With its 20 x 30.5cm (8 x 12”)
elliptical shape, this reflector
produces an oval pool of light
that can be used to create a
natural vignette on a
background or other areas. Two
fitted spring clips allow colour
gels to be fitted. BW2560
Backlite Reflector
A set of colour gels including seven popular colours, a neutral-density filter and two diffusers for
heightened lighting creativity is also available for the Backlite reflector. BW2552
40° Sunlite Reflector
A 43cm (17”) white-painted
reflector designed to replicate
sunlight for photographing items
such as architectural models. The
white painted interior of the
Sunlite helps to ensure that an
even light is delivered. BW1868
DID YOU KNOW? that Bowens have over 40 light shaping tools
and accessories available for all their monolights that use the
current ʻSʼ type accessory fitting. Included among the range of
accessories are a wide variety of reflectors and softboxes. For
more information visit the website on www. bowens .co.uk