Metrohm Dosino Regeneration - Manual (Page 10)

3.1 Attaching the bottle cap
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 ￭￭￭￭￭￭￭￭
IC equiment: Dosino Regeneration
3 Installation
Proceed as follows to install the IC equiment: Dosino Regeneration:
￭ Attach the bottle cap to the regeneration solution bottle.
￭ Assemble the 800 Dosino and fasten it to the holder.
￭ Connect the Dosino to the bottle.
￭ Connect the Dosino to the inline filter.
￭ Connect the inline filter to the suppressor.
3.1 Attaching the bottle cap
Required accessories ￭ Bottle with regeneration solution
￭ Eluent bottle cap (6.1602.160)
￭ Adsorber tube (6.1619.000)
￭ Adapter for adsorber tube (6.1624.000)
￭ FEP aspiration tubing (6.1829.020)
1 Mounting the aspiration tubing
￭ Use the capillary cutter to cut the aspiration tubing to such a
length that it touches the bottom of the bottle.
￭ Place the aspiration tubing in the M6 opening of the bottle cap.
￭ Place an O-ring in the M6 opening.
2 Inserting the stopper
￭ Tighten the M8 stopper to the M8 opening of the bottle cap.