Buffalo Technology WLA-L11 - Manual (Page 10)

WLA-L11 User’s Manual 8
Windows 2000
The TCP/IP protocol is set on the settings personal computer using the following procedure.
1 Start Windows 2000, and log on using your logon name (e.g., Administrator with
administrator access).
2 Click the Start button. Then select Settings and Network and Dial-up Connec-
tions.
3 Double-click the Local Area Connection icon.
4 Click the Properties button.
5
Check it Internet Protocol (TCP/IP) is dis-
played.
If Internet Protocol (TCP/IP) is not
displayed, refer to the Adding TCP/IP Pro-
tocols (Windows 2000) section (page 10).
6
Select Internet Protocol (TCP/IP), and click
the Properties button.