Brother DCP-340CW - Manual (Page 40)

For Network Users
38
How to set the machine’s
network settings to wireless
LAN or wired LAN
To connect your Brother machine to a wireless or
wired network you must configure the machine from
the machine’s control panel for the network type you
are using.
For wireless LAN
On your machine, press Menu, then use the a, b
and Set keys to choose 3, 6, then
WLAN
, and then a
Yes
to reboot the machine. The wired network
interface will become inactive with this setting.
It will take about a minute for the LAN menu on the
LCD to become available again.
For wired LAN
On your machine, press Menu, then use the a, b
and Set keys to choose 3, 6, then
Wired LAN
, and
then a
Yes
to reboot the machine. The wired network
interface will become inactive with this setting.
It will take about a minute for the LAN menu on the
LCD to become available again.