Metrohm 867 pH Module - Manual (Page 27)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
867 pH Module
￭￭￭￭￭￭￭￭ 19
The following table offers an overview of the balances that you can use
together with the 867 pH Module and of which cable you will need for
connection to the RS-232 interface:
Balance Cable
AND ER, FR, FX with RS-232 inter-
face (OP-03) 6.2125.020 + 6.2125.010
Mettler AB, AG, PR (LC-RS9) In the scope of delivery for the
balance
Mettler AM, PM, PE with interface
option 016
or
Mettler AJ, PJ with interface
option 018
6.2146.020 + 6.2125.010
Also from Mettler: ME 47473
adapter and either ME 42500
hand switch or ME 46278 foot
switch
Mettler AT 6.2146.020 + 6.2125.010
Also from Mettler: ME 42500
hand switch or ME 46278 foot
switch
Mettler AX, MX, UMX, PG, AB-S,
PB-S, XP, XS 6.2134.120
Mettler AE with interface option
011 or 012 6.2125.020 + 6.2125.010
Also from Mettler: ME 42500
hand switch or ME 46278 foot
switch
Ohaus Voyager, Explorer, Analyti-
cal Plus Cable AS017-09 from Ohaus
Precisa balances with RS-232-C
interface 6.2125.080 + 6.2125.010
Sartorius MP8, MC, LA, Genius,
Cubis 6.2134.060
Shimadzu BX, BW 6.2125.080 + 6.2125.010
Operation with Touch Control
Connect the balance as follows:
1 Plug in the USB plug of the USB/RS-232 adapter at the USB connec-
tor of the 867 pH Module.