Blaupunkt BARCELONA MP35 - Manual (Page 10)

41
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Adjusting the volume
You can adjust the volume in steps from
0 (off) to 66 (maximum).
To increase the volume,
➮
turn the volume control
3
clock-
wise.
To decrease the volume,
➮
turn the volume control
3
anti-
clockwise.
Setting the power-on volume
You can set the power-on volume.
➮
Press the MENU button
7
.
➮
Press the or button
6
repeat-
edly until “ON VOLUME” appears
in the display.
➮
Adjust the power-on volume using
the
buttons
6
.
To help you adjust the setting more eas-
ily, the device will increase or decrease
the volume as you make your changes.
If you change the setting to “LAST VOL”,
the volume level that was set the last
time you switched off the device will be
activated again.
Note:
●
To protect your hearing, the power-
on volume is limited to a value of
“38”. If the volume level was higher
than this when the device was last
switched off and the “LAST VOL”
setting is activated, the system will
reset the volume to “38” when you
switch the device on again.
When you have finished adjusting the
setting,
➮
press the MENU button
7
twice.
Quick volume reduction (mute)
You can quickly decrease the volume
(mute) to a level preset by you.
➮
Briefly press button
1
.
“MUTE” appears in the display.
Cancelling mute
To return to your previously set volume
level,
➮
briefly press button
1
again.
Setting the mute level
You can adjust the mute level.
➮
Press the MENU button
7
.
➮
Press the or button
6
repeat-
edly until “MUTE LVL” appears in
the display.
➮
Adjust the mute level using the
buttons
6
.
When you have finished adjusting the
setting,
➮
press the MENU button
7
twice.
Switching the confirmation beep
on/off
The system will play a confirmation beep
for some functions if you keep a button
pressed down for longer than two sec-
onds, for instance, when you assign a
radio station to a station button. You can
switch the beep on/off.
ADJUSTING THE VOLUME