Bowflex Revolution - Manual (Page 11)

9
Maintenance
To store your machine, you can either leave it in the fully assembled, extended position, or you can raise the seat
rail system to make a smaller footprint for storing. To raise the seat rail system, pull the pop pin on the lower seat
rail at the leg extension assembly and use the handle to lift the seat rail assembly into place.
Preventative Maintenance
The safety and integrity designed into a machine can only be maintained when the equipment is regularly
examined for damage and repaired. It is the sole responsibility of the owner to ensure that regular
maintenance is performed. The owner is responsible to make sure that regular maintenance is done. Worn or
damaged components must be repaired or replaced immediately. Only manufacturer supplied components
should be used to maintain/repair the equipment.
This product, its packaging, and components contain chemicals known to the State of California to cause
cancer, birth defects, or reproductive harm. This Notice is provided in accordance with California’s
Proposition 65. If you would like additional information, please refer to our Web site at www.nautilus.com/
prop65
Keeping your machine in good repair takes a minimal amount of time, and will ensure you have many years of use.
In addition to preventative maintenance such as checking to make sure the unit is clean and free from defects,
wiping down surfaces, and keeping attachments in a secure location, maintenance should be limited.
Daily
Wipe down with a damp cloth. Pay special attention to areas where perspiration could settle.
Monthly
Inspect the unit for loose parts, nuts, bolts, etc. Inspect ropes and straps for fraying or excessive wear.
Yearly
Remove the Top Cover and inspect the condition of the internal components.
Look for fraying or excessive wear on straps, ropes, and moving parts, and replace as necessary.