Hinkley Lighting 25W G9 STEP LIGHT 58025 - Manual (Page 2)

mounting instructions
Family: 120V Series Step Light Item No. 58025/58009 BZ
THERMAL PROTECTION IS NOT REQUIREED FOR THIS FLUORESCENT LAMPING.
Drawing 2 - Fixture Mounting
Drawing 3 - Template
1. Level Supplied template (D) - see Drawing 3 - on desired step area (1) and drill four
diameter clearence holes (2) - see Drawing 2. Failure to level will cause fixture to have
a tilted appearance.
2. Remove the 1/2” PT plugs (E) from the side and bottom of the housing (B) and pull
the supply wires through the holes and into the housing (B).
3. Be sure all unused electrical plugs have been relaced. Using template (D), cut
placement hole into desired step area (1).
4. Secure housing to desired step area (1) with four 8-32 x 1 3/4” wood screws (3) not
provided to housing (B).
5. Please refer back to the front of this sheet to install lamp and complete the
installation of this fixture.
1
D B
2
1
STEPLIGHT
THIS SIDE UP
6 1
4
" [159.23mm]
Ш 3
16
" [Ш4.7
6mm]
Throug
h Hole
s (4) R
equire
d.