Billion Electric Company BiPAC 7402G - Manual (Page 139)

802.11g ADSL2+ VPN Firewall Router
Chapter 4: Configuration
DefaultVlan lists all member ports. It is necessary to group specific member ports for each VLAN.
From the example, two VLAN groups are requested: Data and Video.
To create another VLAN group for Video by clicking Create VLAN.
Given a name and ID (PVID) to identify the Video group. The valid value range for PVID is 1 ~ 4094.
From the example:
VLAN untagged ports for Data/Internet: ethernet, wireless and wireless_wds.
VLAN untagged ports for Video: ethernet1, rfc-1483-0 ~ rfc-1483-6.
Click Apply to made change effective immediately.
Mapping the VLAN Bridge with Bridge Interface created in Step1, you will see the conformable
relationship in these two screenshots.
Step 4: IGMP Snooping Enable
Go Configuration Advanced IGMP.
IGMP Snooping must be enabled in order to allow video stream forwarding correctly.
138