Hinkley Lighting HARBOR 2572 - Manual

assembly instructions
Family: Harbor Item No. 2572
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first making all
necessary electrical connections, and then hanging the fixture from the ceiling.
start here
2572
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.





1. Please refer to the hanging instruction sheet (I.S. 19-50) provided to complete
installation of this fixture.
Drawing 1 - Glass Replacement
11
14
13
12
Glass Replacement Instructions - see Drawing 1.
1. Remove the four screws (2) from the bottom of the cage (1). Making sure to support
the bottom plate (3) during this operation.
2. Drop bottom plate (3) down and glass (4) will drop down with the plate.
3. Place new glass (4) into bottom plate (3) and slip back up into the fixture.
4. Replace screws (2) removed earlier.
4.4.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com