Brady TLS2200 - Manual (Page 9)

8
Quick Label Making Instructions
The following steps are all you need to create a simple label. Read the rest of this manual for
detailed information on each of these steps, as well as other functions not listed here.
Follow these steps:
1. Install a fully charged battery pack.
2. Install a ribbon cartridge.
3. Install a label roll of the desired type and size.
4. Turn the power switch “On.”
5. Type the text for your label. Press the <Enter> key to begin each new line of text.
6. Edit the text so it reads exactly as you want it to.
7. Press the <Print> key to print the label.
8. Use the built-in cutter to remove the finished label.