Record your own outgoing message, Check or delete your outgoing message, Answer settings – BT INSPIRE 1500 User Manual
Page 36
36
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email [email protected]
When recording your Answer Only
message, remember to advise your
caller that they will not be able to
leave a message. Your own Answer
Only message can be up to 1 minute
long and will replace the pre-recorded
message.
To reinstate the pre-recorded
messages, delete your own recorded
outgoing message, see "Check or
delete your outgoing message".
You cannot delete a pre-recorded
message. If you delete your
personal outgoing message the
pre-recorded outgoing message will
be automatically reinstated as your
outgoing message.
Answer mode
Choose which outgoing message you
want played to callers.
Answer delay
Answer delay sets the number of
times your BT Inspire 1500 will ring
before the answer machine picks
up your call and starts playing the
outgoing message. You can change
the Answer Delay setting to 2-9 Rings
and Time Saver.
For compatibility with BT 1571 (or
another voicemail service) do not set
the ring delay to more than 6 rings.
For more information on BT 1571,
please see page 50.
Time saver
When you ring in to access your
messages remotely, if your answering
machine is set to time saver and you
have new messages it will answer
after 10 seconds, if you do not have
any new messages, it will answer
after 20 seconds. This means you can
hang up knowing you have no new
messages, saving you time and the
cost of the call.
Recording time
Set the maximum message length:
1, 2 or 3 minutes or unlimited.
Record your own outgoing message
1
. Press
Menu
. Scroll
to
Answer
Machine
. Press
OK
.
2
. Scroll
to
Outgoing
Msg.
and press
OK
.
3
.
Record
Message
is highlighted. Press
OK
.
4
. Scroll
or
to highlight
Ans
&
Record
or
Answer
Only
and press
OK
.
5
. Speak your announcement after the long beep. Press
Save
to
stop recording.
6
. Your message is then played back. If you want to delete it,
press
Delete
during playback. Or press
OK
to save.
Check or delete your outgoing message
1
. Press
Menu
. Scroll
to
Answer
Machine
. Press
OK
.
2
. Scroll
to
Outgoing
Msg
and press
OK
.
3
. Scroll
to
Play
Message
. Press
OK
.
4
. Scroll
to
Ans
&
Rec.
or
Answer
Only
and press
OK
.
5
. Your message is then played back. If you want to delete it,
press
Delete
during playback. Or press
OK
to save.
Answer settings
1
. Press
Menu
. Scroll
to
Answer
Machine
. Press
OK
.
2
. Scroll
to
Ans.Settings
and press
OK
.
3
.
Answer
Mode
is highlighted, press
OK
. Press
or
to select the outgoing message mode,
Answer
Only
or
Ans
&
Rec
. Press
OK
.
4
. Scroll
to
Answer
Delay
and press
OK
. Press
or
to select the number of rings (2, 3, 4, 5, 6, 7, 8, 9 or
Time Saver) and press
OK
.
5
. Scroll
to
Recording
Time
and press
OK
. Press
or
to select the maximum message length, 1, 2 or 3
minutes or unlimited, and press
OK
.
6
. Press
Back
to return to the previous menu level.