Hinkley Lighting PLANTATION 2120PZ - Manual (Page 3)

start here
Drawing 1
I.S.200
caulking instructions
I.S.
200
8.12.10
caulking gun
1. After securing fixture to the wall it is recommended that the gap between the wall
and fixture backplate be sealed with any good quality waterproof caulk or silicone sealant.
(NOT INCLUDED)
Backplate
bead of
caulk to
seal gap
See Drawing 1.
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com
1. After securing fixture in place it is recommended that the gap between the mounting top
and fixture base be sealed with any good quality waterproof caulk or silicone sealant.
(NOT INCLUDED). It is also recommended that a small bead of caulk or sealant be put under
the ball knobs used to mount fixture.
caulking gun
ball
knob
caulking
See Drawing 2.
Drawing 2