Brother DCP-377CW - Manual (Page 4)

4
7
Check the print quality
a
Set Paper and
q
Press Start
Press Colour Start.
b
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press a (Yes) to
finish the quality check and go to step
8.
If you can see missing short lines, press b (No)
and go to
d.
d
The LCD asks you if the print quality is OK for
black and colour. Press a (Yes) or b (No).
e
Press a (Yes), the machine will then start
cleaning the colours.
f
After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again. Go back to
b.
8
Set the date and time
a
Press Menu.
b
Press a or b to choose 0.Initial Setup.
Press OK.
c
Press a or b to choose 1.Date&Time.
Press OK.
d
Press a or b to enter the last two digits of the
year, and then press OK.
e
Repeat for Month and Day, and Hours and
Minutes in 24-hour format.
f
Press Stop/Exit.