Watts PWBWMZ 3 Cu. Ft. - Manual

For Residential Applications
ES-WQ-PWBWMZ
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
PWBWMZ
Series PWBWMZ
Residential Backwashing Filter Systems
PURE WATER
Connection Sizes: 1" (25mm)
Flow Rates: Up to 15 gpm (57 lpm)
Watts Whole House filters for superior sediment removal.
Watts filtration systems for sediment removal use our high per-
formance Micro Z™ filter media to provide increased loading
capacities and higher service flow rates. Micro Z™’s unique
external surface offers increased porosity to out perform sand
filters by reducing water consumption. A Micro Z™ filter bed
holds 2.8 times the amount of solids a sand bed holds, reduc-
ing backwash requirements by almost three times.
Features
• High service flow rates
• Superior filtration performance!
• Reliable equipment designed for long-term service
• Reduces water consumption because the need to backwash
is less
• High solids loading
• 3-5 micron particle size removal
• Single media filter bed
Media
Our Micro Z™ is a special highly efficient granular filter media
that has a nominal particle size removal of 3-5 micron.
Compare that to sand at 30 micron. Micro Z™ allows sediment
to penetrate deep into the bed for high loading efficiencies to
reduce backwash demands and overall wastewater generation.
Pro SE Series Control Valve
Manufactured from high-tech materials, the Series Pro SE
control valve has been engineered and tested to withstand the
equivalent of 27 years of uninterrupted daily use. The proprie-
tary design features a Teflon ® coated piston that glides through
a series of seals and spacers. This seal/spacer and piston con-
figuration is the most reliable design in valve technology. The
valve features an electronic control for easy programming.
Filter Tank
Features a non-corrosive fiberglass tank with a thermoplastic
inner liner. The tanks are NSF/ANSI Standard 44 or 61 certified.
Teflon ® is a registered trademark of E. I. du Pont de Nemours
and Company or its affiliates.
Note: Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before or after
the system.
System Specifications
Minimum inlet pressure: 30 psig
Maximum operating pressure: 125 psig
Minimum water temperature: 34°F (1°C)
Maximum water temperature: 110°F (43°C)
Power
Voltage: 120VAC
Frequency: 60Hz
Power consumption: 7 Watts Maximum
Installation
Location: Indoors (Protect from direct sunlight)
Minimum ambient temperature: 34°F (1°C)
Maximum ambient temperature: 122° (49°C) F
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.