Behringer SNR2000 User Manual
Page 19
19
DENOISER SNR2000
Fig. 3.6: Noise reduction on keyboards
+
Please note that low level signal sources such as guitars must be pre-amplified beforehand, as
the BEHRINGER DENOISER only processes line level signals (-10 dBV to +10 dBu).
3.2.7 Reducing noise in P.A. systems
The noise produced by P.A. systems is particularly annoying. Hum induced in the microphone cables
combined with high gain settings results in a drastic increase of noise.
The DENOISER can solve these problems, too. Insert the unit into the individual microphone channels (line
inserts) or into the master, monitor or effects buses.
Fig. 3.7: Reducing noise in a P.A. system
3.2.8 Noise reduction in Hi-Fi and video applications
The DENOISER can also be used in Hi-Fi and video applications. The unit is simply placed between the
signal source (cassette player, tuner, VCR, etc.) and the power amp. We recommend using the so-called
tape monitor connections that most preamplifiers offer. Thus, the DENOISER can be inserted into any
signal source.
3. APPLICATIONS