Brother DCP-157C - Manual (Page 43)

Printing photos from a memory card or USB Flash memory drive
35
4
Adjusting Brightness,
Contrast and Colour
4
Brightness
4
a
Press Menu.
b
Press a or b to choose
2.PhotoCapture
.
Press OK.
c
Press a or b to choose 5.Brightness.
Press OK.
d
Press a or b to make a lighter or darker
print.
Press OK.
e
Press Stop/Exit.
Contrast
4
You can select the contrast setting. More
contrast will make an image look sharper and
more vivid.
a
Press Menu.
b
Press a or b to choose
2.PhotoCapture
.
Press OK.
c
Press a or b to choose 6.Contrast.
Press OK.
d
Press a or b to increase or decrease the
contrast.
Press OK.
e
Press Stop/Exit.
Colour Enhancement
4
You can turn on the colour enhancement
feature to print more vivid images. Printing
time will be slower.
a
Press Menu.
b
Press a or b to choose
2.PhotoCapture
.
Press OK.
c
Press a or b to choose
7.Color Enhance
.
Press OK.
d
Press a or b to choose On (or Off).
Press OK.
„ If selecting Off, then go to g.
e
Press a or b to choose
1.White Balance
, 2.Sharpness or
3.Color Density
.
Press OK.
f
Press a or b to adjust the degree of the
setting.
Press OK.
g
Press Stop/Exit.
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will effect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other colour. By using this, you can
correct this effect and bring the white
areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Colour Density
This setting adjusts the total amount of
colour in the image. You can increase or
decrease the amount of colour in an
image to improve a washed out or weak
picture.