Blaupunkt Monterrey MP35 - Manual (Page 14)

14
CD MODE
You must not hinder or assist the drive
as it draws in the CD.
➮ Gently close the control panel
whilst exerting a little pressure until
you feel it clicks into place.
CD playback begins.
Note:
●
The unit will remain off if the igni-
tion is off. To turn it on and play the
inserted CD, press button
1
once.
If a CD is already inserted in the drive
and the unit is playing Radio, CD
Changer or AUX mode.
➮ Press the SRC button
;
repeat-
edly until “CD” appears in the dis-
play.
Playback begins from the point at which
it was last interrupted.
Selecting tracks
➮ Press one of the arrow buttons
6
to select the next or previous track.
If you press the or button
6
once,
the current track will be played again
from the beginning.
Fast searching (audible)
To fast search backwards or forwards,
➮ keep one of the buttons
6
pressed until fast reversing / fast
forwarding begins.
Random play (MIX)
➮ Press button 5 MIX
9
.
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
Stopping MIX
➮ Press button 5 MIX
9
again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
Scanning tracks (SCAN)
You can briefly play all the tracks on a
CD.
➮ Press the MENU button
7
for
longer than two seconds.
The next track will then be played for
scantime as set in the “Setting the scant-
ime”.
Note:
●
You can set the scantime. For fur-
ther details, please read the sec-
tion entitled “Setting the scantime”
in the “Radio mode” chapter.
Stopping SCAN and continuing
playback
➮ To stop scanning, press the MENU
button
7
.
The current track will then continue to
be played.
Repeating tracks (REPEAT)
➮ If you want to repeat a track, press
button 4 RPT
9
.
“RPT TRCK” appears briefly in the dis-
play and the RPT symbol lights up. The
track is repeated until you deactivate
RPT.
Cancelling repeat
➮ If you want to stop the repeat func-
tion, press button 4 RPT
9
again.