MTD 450 Series - Manual (Page 17)

1

Parts List
Ref.
No.
Part No. Description
1. 736-0217 Lock Washer, 3/8
2. 714-0149B Cotter Pin
3. 681-0048 Wing Knob 5/16-18
4. 681-0094 Chute Deflector Assembly
5. 711-0835 Clevis Pin
6. 781-0457 Shredder Screen
7. 726-0211 U-Nut 5/16-18
8. 750-0793 Spacer
9. 712-3027 Hex Lock Nut, 1/4-20
10. 712-3004A Hex Lock Nut 5/16-18
11. 736-0119 Lock Washer 5/16
12. 681-0117 Inner Impeller Housing Assembly
13. 710-3025 Hex Cap Screw 5/16-18 x.625
14. 710-0157 Hex Cap Screw 5/16-24 x.75
15. 781-0490 Chipper Blade
16. 710-1054 Hex Cap Screw 5/16-24 x 1.0
17. 681-0030 Impeller Assembly
18. 712-0411 Hex Lock Nut 5/16-24
19. 781-0735 Retainer Pin Clip
20. 719-0329 Flail Blade
21. 711-0833B Clevis Pin
22. 715-0166 Pin
23. 736-0247 Flat Washer 3/8 x 1.25
24. 742-0571 Shredder Blade
25. 710-1254 Hex Cap Screw 3/8-24 x 2.25
26. 681-0004A Outer Impeller Housing Assembly
27. 710-0825 Hex Cap Screw 1/4-20 x 3.75
28. 781-0515 Front Support Bracket
29. 781-0574 Shredder Plate
30. 681-0104 Rear Hopper Bracket Assembly
31. 732-0306 Compression Spring 1.75
32. 736-0117 Flat Washer
33. 714-0104 Cotter Pin
34. 736-0264 Flat Washer.330 ID x.630 OD
35. 710-0376 Hex Cap Screw 5/16-18 x 1.0
36. 748-0453 Spacer,.375 ID x 2.50 LG
37. 736-0362 Flat Washer.320 ID x 1.25 OD
38. 712-0429 Hex Lock Nut 5/16-18
39. 731-1710A Hopper Collar
40. 681-0123 Front Hopper Bracket Assembly
41. 711-1128 Lock Rod
42. 731-1707 Hopper Assembly
43. 710-3008 Hex Cap Screw 5/16-18 x.75
To order replacement
parts, contact
1-800-800-7310 or visit
www.mtdproducts.com
NOTE: This Operators
Manual covers a range
of product specifica-
tions for various
models. Characteristics
and features discussed
and/or illustrated in this
manual may not be ap-
plicable to all models.
MTD LLC reserves the
right to change product
specifications, designs
and equipment without
notice and without
incurring obligation.