Bosch LOGIXX 9 - Manual (Page 19)

19
Spin speed
The speeds can be changed.
The maximum displayed spin speed
depends on the selected
programme. See also information
on Page 18.
q Turn the programme selector
toĂthe desired programme.
q Load the laundry and close
theĂloading door.
The Start/Pause indicator light
flashes (red).
Example:
q Press the Menu button until
SpinĂspeed: " is displayed.
Current spin speed flashes.
The Start/Pause indicator light
flashes (red).
i The menu is left if a button is
not pressed within 10 seconds.
Changed settings are lost.
q Press the Change button until
the desired spin speed or
Without final spin" is displayed.
Other settings can be selected by
pressing the Menu button; the
same settings can be changed by
pressing the Change button.
q Press the Start/Pause button.
The programme starts.
The indicator light is on (red).
i The individual programme
steps are indicated in the
display field.
Programme finished
at?
i Make sure that the time has
been set - see Set clock",
Page 23 .
q Turn the programme selector
toĂthe desired programme.
q Load the laundry and close the
loading door.
The Start/Pause" indicator
light flashes (red).
Example:
q Press the Menu" button until
Programme finished at" is
displayed.
Current end time flashes.
The Start/Pause" indicator
lightĂflashes (red).
i The menu is left if a button is
notĂpressed within 10 seconds.
Changed settings are retained.
q Press the Change" button until
the programme end time is
displayed.
The programme end can be set
inĂ30 minute steps.
The time can be programmed
upĂto a maximum 24 hours in
advance.