E-flite Apprentice 15e PNP - Manual (Page 10)

10 E-flite Apprentice PNP Assembly Manual
 3. Slide the battery into the battery compartment.
The connector will face the back of the airplane.
 4. Ensure the battery is slid all the way into the
front of the battery compartment. Use the hook and
loop straps to secure the battery in the fuselage.
 5. Close the hatch from the rear of the fuselage.
Turn the battery hatch keeper 90 degrees to secure
the hatch.
Removing the Propeller
Required Parts
Fuselage assembly
Required Tools
Adjustable wrench
Always remove the propeller when checking
the radio system to prevent any personal
injury if the motor were to start.
Before performing any maintenance to the motor,
make sure the battery has been unplugged and
removed from your model to prevent injury.
 1. Remove the spinner cone from the spinner.
It should snap away from the backplate with a
little force.